K10 Kooltherm
Kooltherm K10 PLUS Soffit Board
Group 1 fire classification and an impact-resistant face, over the same phenolic core.
- Kingspan
- In stock in Osborne Park
Sizes and codes
| Thickness | Stock |
|---|---|
| 31mm | In stock |
| 36mm | In stock |
| 46mm | In stock |
| 56mm | In stock |
| 66mm | In stock |
| 76mm | In stock |
| 86mm | In stock |
| 96mm | In stock |
8 sizes. Ask the counter if you need one that is not listed.
Product Details
Kooltherm K10 PLUS pairs the Kooltherm phenolic core with an impact-resistant fibre cement outer face. That face is what sets it apart: it carries a Group 1 NCC fire classification and stands up to knocks in a way a foil or tissue facing cannot.
It is the board to reach for on carpark soffits and exposed ceilings with stricter fire or durability requirements. Quoted thicknesses include the fibre cement facing, which is why they differ from the plain K10 boards.
Best for K10 PLUS
- Carpark ceilings requiring a Group 1 surface
- Soffits exposed to impact or vehicle traffic
- Projects where the fire classification rules out a foil-faced board
- Exposed concrete soffits needing a durable finish
Selecting the Right K10 PLUS
Choose your thickness
Thicknesses run 31 mm to 96 mm including the fibre cement face, giving declared R-values from R1.10 to R4.15. Because the facing is included in the figure, do not compare these numbers directly against plain K10 thicknesses.
Confirm the fire requirement first
K10 PLUS is specified where Group 1 is required at the soffit. If your specification only calls for Group 2, K10 G2 will meet it at lower cost.
Consider the exposure
- K10 PLUS , trafficked or impact-prone soffits, Group 1 required
- K10 G2 , standard concealed or low-risk soffits
- K10 G2W , visible soffits where a white finish is wanted
Why Builders and Designers Specify K10 PLUS
- Group 1 NCC fire classification
- Impact-resistant fibre cement outer face
- Phenolic core at 0.022 W/m.K thermal conductivity
- Suited to trafficked and exposed carpark soffits
- Fibre-free insulation core
- CodeMark certified
- Compliant with AS/NZS 4859.1:2018
- Global GreenTag GreenRate certified
- Australian made
Installation Notes That Prevent Callbacks
Need to confirm thickness against a Group 1 specification? Talk to our team .
- K10 PLUS is heavier than the plain K10 range. Use fixings rated for the composite board and follow Kingspan's specified centres rather than assuming the same pattern as K10 G2.
- Cut with tooling suitable for fibre cement and apply the usual fibre cement dust precautions.
- Keep joints tight and evenly set out, particularly where the soffit is visible.
- Check the fixing schedule against the current Kingspan installation guide before starting.
Why choose K10 PLUS over K10 G2?
Fire classification and durability. K10 PLUS achieves Group 1 under the NCC and has an impact-resistant fibre cement face, where K10 G2 is Group 2 with a foil facing.
Do the thicknesses include the fibre cement face?
Yes. The quoted 31 mm to 96 mm range is for the complete board including the facing.
Can it be cut on site?
Yes, using tooling suited to fibre cement and the usual dust control measures for that material.
Does it need a separate lining?
No. The fibre cement face is the finished surface, which is part of why it suits exposed carpark soffits.
Related Products
• Kooltherm K10 G2 Soffit Board , foil-faced board, Group 2 NCC classification • Kooltherm K10 G2W White Soffit Board , white finish for visible soffits • Kooltherm K17 Insulated Plasterboard , insulated plasterboard for internal wall lining • Kooltherm K8 Cavity Board , cavity wall insulation for masonry construction
Product Specifications
| Product Thickness (mm) | Declared R-value | Board Size (mm) | Coverage per Board (m2) | Insulation Core | Facings | Compressive Stress |
|---|---|---|---|---|---|---|
| 31 | R1.10 | 2400 x 1200 | 2.88 | Rigid thermoset phenolic | Impact-resistant fibre cement outer | ≥100 kPa at 10% |
| 36 | R1.40 | 2400 x 1200 | 2.88 | Rigid thermoset phenolic | Impact-resistant fibre cement outer | ≥100 kPa at 10% |
| 46 | R1.75 | 2400 x 1200 | 2.88 | Rigid thermoset phenolic | Impact-resistant fibre cement outer | ≥100 kPa at 10% |
| 56 | R2.30 | 2400 x 1200 | 2.88 | Rigid thermoset phenolic | Impact-resistant fibre cement outer | ≥100 kPa at 10% |
| 66 | R2.75 | 2400 x 1200 | 2.88 | Rigid thermoset phenolic | Impact-resistant fibre cement outer | ≥100 kPa at 10% |
| 76 | R3.25 | 2400 x 1200 | 2.88 | Rigid thermoset phenolic | Impact-resistant fibre cement outer | ≥100 kPa at 10% |
| 86 | R3.70 | 2400 x 1200 | 2.88 | Rigid thermoset phenolic | Impact-resistant fibre cement outer | ≥100 kPa at 10% |
| 96 | R4.15 | 2400 x 1200 | 2.88 | Rigid thermoset phenolic | Impact-resistant fibre cement outer | ≥100 kPa at 10% |
Scroll the table sideways to see every column.
More k10 kooltherm
-
Kooltherm K10 G2 Soffit Board
Keep the headroom, lose the heat , slim phenolic insulation for concrete soffits.
-
Kooltherm K10 G2W White Soffit Board
The same thermal performance as K10 G2, with a finish you can leave on show.